How to Flash Huawei MediaPad M1 Stock Firmware – All Firmwares

If you own a Huawei device and want to flash or upgrade your device then here we demonstrate to you how to flash Huawei MediaPad M1 firmware on your smartphone. Or if you are here to repair your Huawei MediaPad T1 10 if it stuck on the Huawei boot logo or Boot Screen, Stuck on the boot loop… or for any reason, you don’t receive an OTA update.

Huawei MediaPad M1 released in October 2014. It’s powered by (Quad-core 1.6 GHz Cortex-A9) HiSilicon Kirin 910, Huawei MediaPad M1 has 1 GB of RAM and 8 GB of ROM. Huawei P30 Pro also comes with a dual CAMERA setup: 5 mp in back & 1 MP in front camera. The Huawei MediaPad M1 Price is about 880EURO.

Huawei MediaPad M1 comes with an 8.0-inch IPS LCD with a resolution of 800 x 1280 pixels, The Huawei MediaPad T1 10 runs on EMUI 8.1 based on Android 4.2.2 and it also comes in 5 Colors (White, Tulip, Carnation, Lotus, Titanium Gray). Huawei MediaPad M1 Powered by a Non-removable 4200 mAh battery.


  • Download Stock Firmware from below.
  • Install Huawei USB driver on your PC.
  • Make Sure: Flashing the right firmware flash file. is not responsible for any damage, try at your own risk.

Download Huawei MediaPad M1 Firmware Flash File

On our page, we share with you all versions of Huawei MediaPad M1 Firmware. Stock Firmware flash file comes with a zip file so you need to download 7zip or WinRAR to extract this zip file.

Don’t try this firmware flash file with your any other Huawei or honor devices. This firmware only supports for the same model of Huawei devices only. We share here all the official files published by the company.

S8-301L V100R001C238B0084.4FullOTA
S8-301w V100R001C115B0034.4FullOTA
S8-301L 4.2 B005SP014.4FullOTA
S8-301L 4.2 B0024.4FullOTA
S8-301L 2015-12-294.4OTA-Full
S8-301L 2015-10-084.4FullOTA-MF
S8-301L 2015-12-294.4OTA-Full
S8-301u 4.2 B0024.4FullOTA
S8-301u 4.2 B0064.4FullOTA
S8-301u 4.2 B0064.4FullOTA-MF
S8-301u 4.2 B0064.4FullOTA
S8-301u 4.2 B0054.4FullOTA
S8-301u 2014-09-194.4FullOTA
S8-301u 2014-12-034.4FullOTA
S8-301u 2014-07-074.4FullOTA
S8-301w 4.2 B0024.4FullOTA
S8-301w 2014-12-314.4FullOTA
S8-306L 4.2 B0074.4FullOTA
S8-306L 4.2 B0104.4OTA
S8-701u 4.3 B0094.4OTA
S8-701u 4.3 B0054.4OTA
S8-701u 4.3 B0094.4OTA
S8-701u 4.3 B008FullOTA
S8-701u 4.3 B007FullOTA
S8-701u 4.3 B006FullOTA
S8-701u 4.3 B003SP02FullOTA
S8-701u 4.3 B006FullOTA
S8-701u 4.3 B006FullOTA
S8-701u 4.3 B002SP01FullOTA
S8-701u 4.3 B009FullOTA
S8-701u 4.3 B008FullOTA
S8-701u 4.3 B005FullOTA
S8-701u 4.3 B001FullOTA
S8-701u 4.3 B006FullOTA
S8-701u 4.3 B007FullOTA
S8-701u 2015-08-21FullOTA


How to take Backup Huawei MediaPad M1

Before flashing Huawei MediaPad M1 Firmware, it’s important to take backup your all personal data include contacts, photos, videos, messages, and important notes.

  • Open the backup app from the device home screen menu.

backup data honor

  • After that, tap on the backup button and then choose the location where you want to save your backup file.
  • Now you want to choose which file you need to backup (It totally depending on you) (Choose- Massages, Calls logs, Contacts, Music, Videos).
  • After that, touch on the backup button to take the backup of your data.
  • Then set a password, (you can also skip this step if you don’t want).
  • After completed then tap on next to begin the backup.

Restore Huawei MediaPad M1

  • Open the backup app once again.
  • Then tap on the restore button.
  • Now choose the source of the data where you want to restore and tap on next.

restore data huawei honor for flash file

  • Then enter your backup data password and tap ok Ok.
  • After that, select the data which one you want to restore and then touch on start on restoration (Massages, Calls, Music, Videos and other).
  • Finally, tap on ok to finish.

How to Flash Huawei MediaPad M1

To flash your device you need to follow some pre-requirements, so below to know all the pre-requirements files and follow them to flash your device successfully.

Flashing requirements:

  • At least 50% of battery charge.
  • SD card 8GB or more.
  • Make sure: your device bootloader is already Unlock.
  • Right Huawei MediaPad M1 flash file for your device: Firmware

Flashing Instructions:

  • First, download the stock firmware on your pc.
  • Then extract the stock firmware and open the extracted folder.

huawei Honor firmware Flash file download

  • After that, insert the Micro SD card to your pc.

copy firmware flash file Huawei Honor

  • Now make a new folder and change the name to dload.
  • Copy the UPDATE.APP file and paste the file to your Micro SD card dload folder.

Huawei / Honor Firmware Update with Flash File ROM

  • Now insert the micro SD card to your Honor phone.
  • Then open the Settings app and then > System > System Update.

Huawei system update with huawei Flash file Firmware

  • After that, tap on the “3 dots” at the top right corner and then tap on Local update.
  • Then select the UPDATE.APP file that you copied earlier to your SD card.
  • Now your Huawei device update will begin.
  • Once completed then check Huawei MediaPad M1 flash file successfully flashing.

Also, we have 4 other methods for flashing your device. you can check out here:

Conclusion of Huawei MediaPad M1 Firmware:

Well, here we have shared how to flash Huawei MediaPad M1 Stock Firmware on your PC. However, if you facing any error while downloading all the files you can let us know in the comment section.

Leave a Comment