How to Flash Huawei Stock Firmware – All Methods

How to Flash Huawei stock Firmware. Here on this page, I am going to share all the working methods for flashing Huawei devices. If you are a user of Huawei or Honor devices then its very important to know how you can update or flash your device to the latest EMUI Android version Or if you want to repair, downgrade or upgrade your Honor / Huawei smartphones & tablets. here on below, I share a full step by step guide of how to flash stock firmware on all Huawei and Honor smartphones & tablets.


  • Download Stock Firmware from below.
  • Install Huawei USB driver on your PC.
  • Need at least 8GB of SD Card.
  • Make Sure: Flashing the right firmware flash file.
  • Unlock OEM on Huawei devices.
  • is not responsible for any damage, try at your own risk.
  • Download Huawei / Honor Firmware: Here

Flash Huawei stock Firmware Via System Updater

  • First, download the stock firmware on your pc.
  • Then extract the stock firmware and open the extracted folder.

  • After that, insert the Micro SD card to your pc.

copy firmware flash file Huawei Honor

  • Copy the UPDATE.APP file and paste the file to your Micro SD card.

Huawei / Honor Firmware Update with Flash File ROM

  • Now insert the micro SD card to your Huawei phone.
  • In your Huawei Phone:
  • Open the Settings app and then > System > System Update.

Huawei system update with huawei Flash file Firmware

  • After that, tap on the “3 dots” at the top right corner and then tap on Local update.
  • Then select the UPDATE.APP file that you copied earlier to your SD card.
  • Now your Huawei device update will begin.
  • Once completed then check you have successfully flash Huawei device.

Flash Huawei stock Firmware Via Custom TWRP recovery

1- First download and extract the Stock Firmware for your device.

2. After that, You need to create a new folder in your SD card.

3. Then rename the new folder to the Dload.

4. Then copy the file on the SD card dload folder.

5. Then boot your Huawei device to the Twrp Recovery:

6. Power off your Huawei device first.

7. After that, press and hold the volume up and power button at the same until you see the Huawei logo on your device.

Flash Huawei / Honor using Custom Recovery


8. Then wait for a few seconds to boot your device into the TWRP recovery mode.

9. Then Go to the install, and locate the file and flash it.

10. Now locate the “Data File” and flash this too.

Flash Huawei/Honor Firmware via TWRP

11. Wait for the finish.

12. Once the update process is finished, Then click on the “Wipe cache/Dalvik” to clean the stock ROM.

13. Then reboot your Huawei device in normal mode.


Flash Huawei stock Firmware Via Normal Update

  • First, download and extract the Stock Firmware for your device.

  • After that, You need to create a new folder in your SD card.
  • Then copy the file on the SD card dload folder.
  • Then on your Huawei Mobile, Open the dialer and enter:  *#*#2846579#*#*
  • Then select ProjectMenu ==> Software Upgrade ==> SDCard Upgrade ==> tap on OK.

Flash Honor Firmware

  • After that, select the file that you copy on your phone storage or in your micro SD card.
  • Wait until the firmware installation process complete.
  • When the installation completes, the phone will restart automatically.
  • If you have the Data File and also you want to flash it to,
  • Create a new folder on your phone storage or in your SD card, and rename the folder name to dload.
  • After that, download & extract the update_data_Xxxxx & move the new file to the dload folder.
  • Then in your Huawei Mobile, Open the dialer and press the below code:


  • Then select ProjectMenu ==> Software Upgrade ==> SDCard Upgrade ==> and tap on OK.
  • Now Select the that you copy on your phone storage or in your SD card.
  • Wait for the installation process completes.
  • Done, the phone will restart automatically.

Flash Huawei stock Firmware Via dload method.

  • Download the full firmware for your Huawei device model: FIRMWARE
  • Make a new folder on your phone storage or in your SD card, and rename it to dload.

copy file to dload

  • Copy all the downloaded firmware files to the dload folder.
  • Then Power off your Huawei phone.
  • Disconnect your Huawei device from Computer.
  • Then press & hold the volume down and then press the power button until you see Huawei logo on your device.

Flash Huawei Firmware via dload mode

  • Then check your device will detect the package and start the update process automatically.
  • Once the Phone update process is successfully, then your Huawei phone will restart automatically & verify the system image file to update your device.
  • Then wait for a few minutes to power on your device successfully. (It takes up to 5-15minutes)

Flash Huawei stock Firmware Via SP Flash Tool

  • Download the SP Flash Tool and Huawei SP Flash Tool firmware.
  • Then extract both of the downloaded files.
  • After that, open the extracted flash tool folder and Run the SP_Flash_tool.exe:
  • Then Click on Scatter-loading, find and locate the Huawei Firmware Scatter File and then press the Open button.
  • After that, click on the Download button.
  • Install the Huawei USB driver for your device.
  • Then Connect your Huawei Mobile:
  • Power off your Huawei device.
  • Then Connect your Huawei device to your PC via working  USB cable.
  • Then check on the SP Flash tool a yellow line will appear.
  • Wait for finish.
  • Once finished you will get a popup of a done button.
  • Done, you have successfully Update Huawei Stock Rom.

Flash Huawei stock Firmware Via Flashy tool.

  1. Download the Huawei Flashy TOOL: FlashY tool.
  2. Then Download the full firmware according to your model: FIRMWARE SECTION
  3. On your Huawei device Enable OEM & USB Debugging.
  4. Then Extract & Copy all the firmware files to the Flashy TOOL folder.
  5. After that, run the Flash.bat file.
  6. Then wait for Flashing complete.
  7. Once flashing finish! disconnect and power on your device you have successfully flashed Huawei phone via Flashy TOOL.

Flash Via Professional Huawei Tool

  1. If you have any professional tools like MRT Huawei Tool, Miracle Huawei Tool or UMT Huawei Tool.
  2. Just download the firmware file according to your device model.
  3. After that, extract all the firmware files.
  4. Run your tool.
  5. After that, click on the browse button and select the firmware file on the tool.
  6. Then click on the Start button.
  7. After that, Power off your device and connect your device to the PC.
  8. Wait for the finish.
  9. Once finish then disconnect and Power on your device.
  10. That’s it. You have successfully flash Huawei firmware.


Well, here we have shared All Methods of Flash Huawei Stock Firmware. However, if you facing any error while downloading all the files you can let us know in the comment section.

Share on:

Me DB Rana, a Passionate person about Android who loves to write about Android OS, Features, and Technology. In my free time, I love to play games.

Leave a Comment