Home Firmware How to Flash Huawei Honor 20 Pro Stock Firmware- Huawei Firmware

How to Flash Huawei Honor 20 Pro Stock Firmware- Huawei Firmware

283
1
Huawei Honor 20 pro Firmware Flash file

If you own a Huawei device and want to flash or upgrade your device then here we demonstrate to you how you can flash Huawei Honor 20 Pro firmware on your smartphone. Or if you are here to repair your Huawei Honor 20 Pro if it stuck on the Huawei boot logo or Boot Screen, Stuck on the boot loop… or for any reason, you don’t receive an OTA update.

Honor 20 Pro released in May 2019. It’s powered by Octa-core 2×2.6 GHz & 2×1.92 GHz & 4×1.8 GHz HiSilicon Kirin 980 chipset, Honor 20 Pro has 8 GB of RAM and 256 GB of ROM. Huawei Honor 20 Pro also comes with Quad CAMERA setup: 40 MP + 16 MP + 8 MP + 2 MP in back & 32 MP in front camera. The Huawei Honor 20 Pro Price is about 550USD.

Honor 20 Pro comes with a 6.4-inch IPS LCD with a resolution of 1080 x 2310 pixels, The Honor 20 Pro Runs on EMUI 10 based on Android 9.0 Pie and it also comes in 3 Colors (Phantom Blue & Black, Icelandic Illusion). Honor 20 Pro Powered by a Non-removable 4000 mAh battery.

Requirements:

  • Download Stock Firmware from below.
  • Install Huawei USB driver on your PC.
  • Make Sure: Flashing the right firmware flash file.

Huaweiflashfile.com is not responsible for any damage, try at your own risk.

Download Huawei Honor 20 Pro Firmware Flash File

On our page, we share with you all version of Huawei Honor P20 Firmware. Stock Firmware flash file comes with a zip file so you need to download 7zip or WinRAR to extract this zip file.

Don’t try this firmware flash file with your any other Huawei or honor devices. This firmware only supports for the same model of Huawei devices only. We share here all the official files published by the company.

YAL-L41 (C432E2R5P1) Android 9 FullOTA
C10E2R3P1(YAL-L41) Android 9 FullOTA
YAL-L41(C10E2R5P1) Android 9 FullOTA
C10E2R3P1(YAL-L41) Android 9 FullOTA
Yale-AL00A(9.1.0.152)
YAL-AL10 (9.1.0.152)
Android 9 OTA
C10E2R5P1(YAL-L41) Android 9 OTA
Yale-AL10B-(9.1.0.2)
YAL-AL10-(9.1.0.2)
Android 9 OTA

 

How to take Backup Huawei Honor P20 Pro

Before flashing Huawei Honor P20 Pro Firmware, it’s important to take backup your all personal data include contacts, photos, videos, messages, and important notes.

  • Open the backup app from the device home screen menu.

backup data honor

  • After that, tap on the backup button and then choose the location where you want to save your backup file.
  • Now you want to choose which file you need to backup (It totally depending on you) (Choose- Massages, Calls logs, Contacts, Music, Videos).
  • After that, touch on the backup button to take the backup of your data.
  • Then set a password, (you can also skip this step if you don’t want).
  • After completed then tap on next to begin the backup.

Restore Huawei Honor P20 Pro

  • Open the backup app once again.
  • Then tap on the restore button.
  • Now choose the source of the data where you want to restore and tap on next.

restore data huawei

  • Then enter your backup data password and tap ok Ok.
  • After that, select the data which one you want to restore and then touch on start on restoration (Massages, Calls, Music, Videos and other).
  • Finally, tap on ok to finish.

How to Flash Huawei Honor 20 Pro Firmware

To flash your device you need to follow some pre-requirements, so below to know all the pre-requirements files and follow them to flash your device successfully.

Flashing requirements:

  • At least 50% of battery charge.
  • SD card 8GB or more.
  • Make sure: your device bootloader is already Unlock.
  • Right Honor P20 Pro flash file for your device: Firmware

Flashing Instructions:

  • First, download the stock firmware on your pc.
  • Then extract the stock firmware and open the extracted folder.

huawei honor 20 pro firmware

  • After that, insert the Micro SD card to your pc.

copy firmware honor 20 pro

  • Now make a new folder and change the name to dload.
  • Copy the UPDATE.APP file and paste the file to your Micro SD card dload folder.

Honor Firmware Update

  • Now insert the micro SD card to your Huawei phone.
  • Then open the Settings app and then > System > System Update.

Huawei firmware update

  • After that, tap on the “3 dots” at the top right corner and then tap on Local update.
  • Then select the UPDATE.APP file that you copied earlier to your SD card.
  • Now your Huawei device update will begin.
  • Once completed then check Huawei Honor P20 Pro flash file successfully flashing.

Also, we have 4 other methods for flashing your device. you can check out here:

Conclusion of Huawei Honor 20 Pro Firmware:

Well, here we have share how you can flash your Huawei Honor P20 Pro Stock Firmware on your PC. However, if you facing any error while downloading all the files you can let us know in the comment section.

1 COMMENT

LEAVE A REPLY

Please enter your comment!
Please enter your name here