If you own an Honor device and want to flash or upgrade your device then here we demonstrate to you how to flash Honor Note 10 firmware on your smartphone. Or if you are here to repair your Honor Note 10 if it stuck on the Honor boot logo or Boot Screen, Stuck on the boot loop… or for any reason, you don’t receive an OTA update.
Honor Play released in October 2018. It’s powered by Octa-core Octa-core (4×2.4 GHz Cortex-A73 & 4×1.8 GHz Cortex-A53) Hisilicon Kirin 970 (10 nm) chipset, Huawei Y9 2019 has 4/6 GB of RAM and 64 GB of ROM. Honor Play also comes with a single CAMERA setup: 16+2 mp in back & 16 MP in front camera. The Honor Play Price is about 120USD.
Honor Note 10 comes with a 6.3-inch IPS LCD with a resolution of 1080 x 2340 pixels, The Honor Note 10 runs on EMUI 9 based on Android 9.0 Pie and it also comes in 3 Colors (Midnight Black, Navy Blue, Violet, Player Edition Red, Player Edition Black). Honor Note 10 Powered by a Non-removable 3750 mAh battery.
Requirements:
- Download Stock Firmware from below.
- Install Huawei USB driver on your PC.
- Make Sure: Flashing the right firmware flash file.
Huaweiflashfile.com is not responsible for any damage, try at your own risk.
Download Honor Note 10 Firmware Flash File
On our page, we share with you all versions of Honor Note 10 Firmware. Stock Firmware flash file comes with a zip file so you need to download 7zip or WinRAR to extract this zip file.
Don’t try this firmware flash file with your any other Huawei or honor devices. This firmware only supports for the same model of Huawei devices only. We share here all the official files published by the company.
| RVL-AL09C00E84R1P11B193 (9.0.0.193) | Android 9 | |
| RVL-AL09 9.0.0.189(C00E84R1P11) RVL-AL09C00E84R1P11B189 (9.0.0.189) |
Android 9 | |
| RVL-AL09C00E84R1P11B189 (9.0.0.189) | Android 9 | |
| RVL-AL09C00E84R1P11B189 (9.0.0.189) | Android 9 | |
| RVL-AL09C00E84R1P11B186 (9.0.0.186) | Android 9 | |
| RVL-AL09C00E84R1P11B186 (9.0.0.186) | Android 9 | |
| RVL-AL09C00E84R1P11B185 (9.0.0.185) | Android 9 | |
| RVL-AL09C00E84R1P11B183 (9.0.0.183)
RVL-AL09C00E84R1P8B181 (9.0.0.181) |
Android 9 | |
| RVL-AL09C00E84R1P7B167 (9.0.0.167) | Android 9 | |
| RVL-AL09 Ravel-AL09BHN 8.2.0.125(C00) | Android 9 | |
| RVL-AL09 Ravel-AL09BHN 8.2.0.106D(C00) | Android 8.1 | |
| RVL-AL09 Ravel-AL09BHN 8.2.0.105(C00) | Android 8.1 | |
| RVL-AL09C00B151 (8.2.0.151) | Android 8.1 | |
| RVL-AL09C00B132 (8.2.0.132) | Android 8.1 | |
| RVL-AL09C00B125 (8.2.0.125) | Android 8.1 |
How to take Backup Honor Note 10
Before flashing Honor Note 10 Firmware, it’s important to take backup your all personal data include contacts, photos, videos, messages, and important notes.
- Open the backup app from the device home screen menu.
- After that, tap on the backup button and then choose the location where you want to save your backup file.
- Now you want to choose which file you need to backup (It totally depending on you) (Choose- Massages, Calls logs, Contacts, Music, Videos).
- After that, touch on the backup button to take the backup of your data.
- Then set a password, (you can also skip this step if you don’t want).
- After completed then tap on next to begin the backup.
Restore Honor Note 10
- Open the backup app once again.
- Then tap on the restore button.
- Now choose the source of the data where you want to restore and tap on next.
- Then enter your backup data password and tap ok Ok.
- After that, select the data which one you want to restore and then touch on start on restoration (Massages, Calls, Music, Videos and other).
- Finally, tap on ok to finish.
How to Flash Honor Note 10
To flash your device you need to follow some pre-requirements, so below to know all the pre-requirements files and follow them to flash your device successfully.
Flashing requirements:
- At least 50% of battery charge.
- SD card 8GB or more.
- Make sure: your device bootloader is already Unlock.
- Right Huawei Y9 2019 flash file for your device: Firmware
Flashing Instructions:
- First, download the stock firmware on your pc.
- Then extract the stock firmware and open the extracted folder.
- After that, insert the Micro SD card to your pc.
- Now make a new folder and change the name to dload.
- Copy the UPDATE.APP file and paste the file to your Micro SD card dload folder.
- Now insert the micro SD card to your Huawei phone.
- Then open the Settings app and then > System > System Update.
- After that, tap on the “3 dots” at the top right corner and then tap on Local update.
- Then select the UPDATE.APP file that you copied earlier to your SD card.
- Now your Huawei device update will begin.
- Once completed then check Honor Note 10 flash file successfully flashing.
Also, we have 4 other methods for flashing your device. you can check out here:
Conclusion of Honor Note 10 Firmware:
Well, here we have shared how to flash Honor Note 10 Stock Firmware on your PC. However, if you facing any error while downloading all the files you can let us know in the comment section.
